[USRP-users] USRP E100 - updating UHD

Leonardo S. Cardoso leonardo.sampaio-cardoso at inria.fr
Thu Jul 9 07:43:12 EDT 2015


Oops, just noticed we’re out of the list… 

Bringing the discussion back to the list

Leo

--
Leonardo S. Cardoso
Maitre de Conference
CITI lab, INSA-Lyon - INRIA



> Begin forwarded message:
> 
> From: "Leonardo S. Cardoso" <leonardo.sampaio-cardoso at inria.fr>
> Subject: Re: [USRP-users] USRP E100 - updating UHD
> Date: 9 Jul 2015 12:02:42 pm CEST
> To: Philip Balister <philip at opensdr.com>
> 
> Hi Philip,
> 
> Thanks again for the tip. 
> 
> I’ve done what you advised but I’m still stuck a rather old version of UHD and GNU Radio. My ultimate goal is to move onto GNU Radio 3.7.x. 
> 
> Are there any pre-compiled images or an easy way to update UHD and GNU Radio by hand?
> 
> Cheers,
> 
> Leo
> 
> --
> Leonardo S. Cardoso
> Maitre de Conference
> CITI lab, INSA-Lyon - INRIA
> 
> 
> 
>> On 03 Jul 2015, at 19:28 , Philip Balister <philip at opensdr.com> wrote:
>> 
>> On 07/03/2015 09:08 AM, Leonardo S. Cardoso via USRP-users wrote:
>>> Hello everyone, 
>>> 
>>> I’m facing some problems trying to update the UHD version of my USRP E100.
>> 
>> Use opkg update; opkg upgrade
>> 
>> That should get a reasonable version of UHD. What feature are you
>> looking for in uhd?
>> 
>> Philip
>> 
>>> 
>>> I’ve followed the steps described in the redmine: http://code.ettus.com/redmine/ettus/projects/usrpe1xx/ <http://code.ettus.com/redmine/ettus/projects/usrpe1xx/> to update the kernel modules as well as to re-compile UHD from the sources. Whenever I try to launch any uhd command to test the new installation I get:
>>> 
>>> linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500; UHD_003.005.004-140-gfb32ed16
>>> 
>>> 
>>> Creating the usrp device with: ...
>>> -- Loading FPGA image: /usr/local/share/uhd/images/usrp_e100_fpga_v2.bin... done = 1
>>> -- Configuration complete.
>>> -- Initializing FPGA clock to 64.000000MHz...
>>> -- USRP-E100 clock control: 10
>>> --   r_counter: 2
>>> --   a_counter: 0
>>> --   b_counter: 20
>>> --   prescaler: 8
>>> --   vco_divider: 5
>>> --   chan_divider: 5
>>> --   vco_rate: 1600.000000MHz
>>> --   chan_rate: 320.000000MHz
>>> --   out_rate: 64.000000MHz
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> USRP-users mailing list
>>> USRP-users at lists.ettus.com
>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>> 
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150709/c5685705/attachment-0002.html>


More information about the USRP-users mailing list