[USRP-users] New to USRP Application

Neel Pandeya neel.pandeya at ettus.com
Mon Apr 20 12:47:39 EDT 2015


Hello Manohar Deshpande:

Here are some resources that can help you get started with GNU Radio. Let
me know if you have any questions or problems installing GNU Radio.

GNU Radio Tutorials and Resources:
https://gnuradio.org/redmine/projects/gnuradio/wiki/Guided_Tutorials
https://gnuradio.org/redmine/projects/gnuradio/wiki/SuggestedReading

Going Deeper Into GNU Radio Companion by Hak5
https://www.youtube.com/watch?v=QhMET2mld14

GNU Radio Tutorials by Balint Seeber (five-part series)
https://www.youtube.com/watch?v=N9SLAnGlGQs&list=PL618122BD66C8B3C4
https://www.youtube.com/playlist?list=PL618122BD66C8B3C4

Introduction to GNU Radio from the DCC by Tom Rondeau (four-part series)
https://www.youtube.com/watch?v=_hGNT1w-jig
https://www.youtube.com/watch?v=cg3TA3EDx78
https://www.youtube.com/watch?v=nemfS9QAYHc
https://www.youtube.com/watch?v=94R2qE7mEc4

I hope this helps.

--Neel



On 19 April 2015 at 11:03, Deshpande, Manohar D. (GSFC-5550) via USRP-users
<usrp-users at lists.ettus.com> wrote:

>  Hi,
>
> I am new to USRP devices and their programing using either GRC, Matlab ,
> or LabVIEW.  I have USRP, USRP 2, USRPN210 devices, I would like to program
> them to perform simple RF recording (I & Q data) .  I sincerely appreciate
> receiving guidance to start.
>
>
>
> Thanks
>
> MD
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150420/d66c2eb5/attachment-0002.html>


More information about the USRP-users mailing list