[USRP-users] Question: new (green) USRP B210 and Takachi enclosure

Dan CaJacob dan.cajacob at gmail.com
Fri Apr 17 18:06:42 EDT 2015


I may or may not have been able to purchase pre-drilled enclosures directly
from Takachi for the latest B2XX models...

Very Respectfully,

Dan CaJacob

On Fri, Apr 3, 2015 at 4:14 AM, Piotr Krysik via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Many thanks Patrick!
>
> Your answer is exactly what I needed to know.
>
> Best Regards,
> Piotr Krysik
>
> W dniu 03.04.2015 o 00:54, Patrick Sathyanathan pisze:
> > Correction: "SMA connector/USB/power jack holes"
> >
> > --Patrick
> >
> > ------------------------------------------------------------------------
> > From: wpats at hotmail.com
> > To: perper at o2.pl
> > Subject: RE: [USRP-users] Question: new (green) USRP B210 and Takachi
> > enclosure
> > Date: Thu, 2 Apr 2015 15:43:17 -0700
> >
> > I recently purchased a B210 enclosure from Takachi and the model I
> > ordered was MXA3-11-16SSH (though the label on the packing said
> > something like FXA3-11-16SSH, can't confirm right now). It fits my
> > revision 6 B210 perfectly. It comes with printing of the front and
> > back panels, which have all SMA connector/UDB/power jack holes, as
> > well as two screw holes in each plate (screws included). You should
> > tell them that it's for the rev 6 and they have all the drawings for it.
> >
> > Here is a snippet from their invoice:
> >
> > *
> >
> > Customization : Ettus B210 ver.6
> >
> > */
> >
> > Enclosure : USD17.93 /unit
> >
> > /
> >
> > All Alu. Mobile Enclosure, Torx-screws
> >
> > Silver Anodized Frames / Silver Anodized End-panels
> >
> > /
> >
> > Milling : USD62.89 /unit
> >
> > /
> >
> > DRW#B2Xx_PLATE_R2_111814 (Updated Nov.20,2014)
> >
> > Note: All inner-side corners of rectangular cutouts are R0.5 (Radius
> >
> > 0.5mm).
> >
> > Note: Base material (color) is visible after machined.
> >
> > /
> >
> > Inkjet-printing : USD26.55 /unit
> >
> > /
> >
> > ART#B2Xx_PLATE_R2_111814 (Updated Nov.20,2014)
> >
> > 2-side, 1-color (Black)
> >
> > --Patrick
> > > Date: Thu, 2 Apr 2015 15:42:42 +0200
> > > To: usrp-users at lists.ettus.com
> > > Subject: Re: [USRP-users] Question: new (green) USRP B210 and
> > Takachi enclosure
> > > From: usrp-users at lists.ettus.com
> > >
> > > W dniu 02.04.2015 o 15:19, David via USRP-users pisze:
> > > > On 2015-04-02 14:14, Piotr Krysik via USRP-users wrote:
> > > >> Hi all,
> > > >>
> > > >> I wonder if Takachi enclosure MXA3-11-16 is suitable for USRP B210
> > > >> revision 6?
> > > >> If yes - is there design for drilling holes in the front and back
> > of the
> > > >> enclosure available?
> > > >
> > > > It doesn't directly answer your question, but an old reply of mine
> > > > might help you:
> > > >
> >
> http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2015-February/012608.html
> > > >
> > > > David
> > > >
> > > I've seen that post but I have following situation:
> > > I'm in advanced talks with a company based in Poland regarding purchase
> > > of 4 Takachi enclosures (with drilled holes and with printing) for B210
> > > devices that we are going to buy. But I just figured out that Takachi
> > > enclosures were advised for white USRPs B210 and there is no
> information
> > > if the revision 6 devices will fit in it. I cannot find any drawing
> with
> > > dimensions for drilling holes in the enclosure for revision 6 B210.
> > >
> > > There is this file:
> > >
> >
> http://files.ettus.com/b2x0_enclosure/B210_PLATE_REV1.2_070913_FINAL2.pdf
> > > but there are no dimensions.
> > >
> > > Piotr
> > >
> > > _______________________________________________
> > > USRP-users mailing list
> > > USRP-users at lists.ettus.com
> > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150417/506f49a5/attachment-0002.html>


More information about the USRP-users mailing list