[USRP-users] ERROR: USRP E310 Network mode

Xinke Zhang zhangxinke at iie.ac.cn
Fri Apr 17 03:07:49 EDT 2015


Hi Philip & Moritz,

Thanks for your kindly help. with your suggestions, the problem has been solved.

Best Regards,

Xinke


> -----Original Messages-----
> From: "Philip Balister" <philip at opensdr.com>
> Sent Time: Thursday, April 16, 2015
> To: "Xinke Zhang" <zhangxinke at iie.ac.cn>, "Moritz Fischer" <moritz.fischer at ettus.com>
> Cc: "usrp-users at lists.ettus.com" <usrp-users at lists.ettus.com>
> Subject: Re: [USRP-users] ERROR: USRP E310 Network mode
> 
> On 04/15/2015 09:34 PM, Xinke Zhang via USRP-users wrote:
> > 
> > Hi Moritz,
> > 
> > Thank you.
> > 
> > I used the e310 sdk toolchain to build the uhd source codes in the host pc, and then transfer the built binary to the e310 device. However, i need to copy the seperate built binary into its corresponding directory. is there any automatic solution to update the uhd in the e310 device? Thanks.
> 
> UHD on the latest set of test images is uhd-3.8.3-rc1. You do not need
> to update it.
> 
> You do need to install 3.8.3-rc1 on the PC you are running network mode
> from.
> 
> Philip
> 
> > 
> > Best Regards,
> > 
> > Xinke
> > 
> >> -----Original Messages-----
> >> From: "Moritz Fischer" <moritz.fischer at ettus.com>
> >> Sent Time: Thursday, April 16, 2015
> >> To: "Xinke Zhang" <zhangxinke at iie.ac.cn>
> >> Cc: "usrp-users at lists.ettus.com" <usrp-users at lists.ettus.com>
> >> Subject: Re: [USRP-users] ERROR: USRP E310 Network mode
> >>
> >> Hi Xinke,
> >>
> >> When upgrading your device UHD you also need to upgrade your host UHD.
> >> The current dizzy-test images are build from the 3.8.3-RC1 tag. Make
> >> sure you build off of that.
> >> Also note that you'll need to run uhd_images_downloader to get the
> >> correct fpga image in place on the device.
> >>
> >> Cheers,
> >>
> >> Moritz
> >>
> >> On Tue, Apr 14, 2015 at 9:44 PM, Xinke Zhang via USRP-users
> >> <usrp-users at lists.ettus.com> wrote:
> >>>
> >>> Hi,
> >>>
> >>> I'm using the usrp e310, and reburn the sd card with
> >>> http://files.ettus.com/e3xx_images/beta/dizzy-test/sdimage-gnuradio-demo.direct.xz.
> >>> when configuring the usrp e310 as network mode (config the ip addr and start
> >>> the usrp_e3x0_network_mode), i use the uhd_find_devices and i can find the
> >>> usrp e310 devices, but when i use the uhd_usrp_probe, it came out the error
> >>> message "Error: e300_remote_codec_ctrl_impl trancation failed". Pls help
> >>> check it. Thank you in advance.
> >>>
> >>> the version of uhd installed in the host pc is 3.8.2-151-gbf4f50de.
> >>>
> >>> Best Regards,
> >>>
> >>> Xinke
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> USRP-users mailing list
> >>> USRP-users at lists.ettus.com
> >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >>>
> > 
> > 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users at lists.ettus.com
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> > 
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150417/1517c8ed/attachment-0002.html>


More information about the USRP-users mailing list