[USRP-users] ERROR: USRP E310 Network mode

Moritz Fischer moritz.fischer at ettus.com
Wed Apr 15 17:24:30 EDT 2015


Hi Xinke,

When upgrading your device UHD you also need to upgrade your host UHD.
The current dizzy-test images are build from the 3.8.3-RC1 tag. Make
sure you build off of that.
Also note that you'll need to run uhd_images_downloader to get the
correct fpga image in place on the device.

Cheers,

Moritz

On Tue, Apr 14, 2015 at 9:44 PM, Xinke Zhang via USRP-users
<usrp-users at lists.ettus.com> wrote:
>
> Hi,
>
> I'm using the usrp e310, and reburn the sd card with
> http://files.ettus.com/e3xx_images/beta/dizzy-test/sdimage-gnuradio-demo.direct.xz.
> when configuring the usrp e310 as network mode (config the ip addr and start
> the usrp_e3x0_network_mode), i use the uhd_find_devices and i can find the
> usrp e310 devices, but when i use the uhd_usrp_probe, it came out the error
> message "Error: e300_remote_codec_ctrl_impl trancation failed". Pls help
> check it. Thank you in advance.
>
> the version of uhd installed in the host pc is 3.8.2-151-gbf4f50de.
>
> Best Regards,
>
> Xinke
>
>
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>




More information about the USRP-users mailing list