[USRP-users] [Discuss-gnuradio] New UHD seems to break a lot...

Martin Braun martin.braun at ettus.com
Wed Apr 15 09:44:07 EDT 2015

Thanks, Ralph. Just to clarify: When you say 'New UHD', do you mean 
3.8.3-RC1, or latest master?


On 15.04.2015 08:40, Ralph A. Schmid, dk5ras wrote:
> It is a B210, but as a note, due to the up to now missing FPGA images I used
> 003.008.003-RC1, not the latest master. Still I had no access to a spectrum
> and DVB-T analyzer, so I have no idea what is happening, I just can confirm
> that RF is transmitted, and the receiver doesn't get a picture, while with
> the snapshot of the same VM before the upgrade is received without problems.
> I will know more in about three hours.
> Ralph.
>> -----Original Message-----
>> From: Martin Braun [mailto:martin.braun at ettus.com]
>> Sent: Wednesday, April 15, 2015 3:15 PM
>> To: Ralph A. Schmid, dk5ras; usrp-users at lists.ettus.com; 'GNU Radio
>> Discussion List'
>> Subject: Re: [Discuss-gnuradio] New UHD seems to break a lot...
>> On 15.04.2015 06:20, Ralph A. Schmid, dk5ras wrote:
>>> Hi,
>>> Not only OpenBTS is affected, also gr-dvbt/t2 do not work any more
>>> with latest uhd. A quick check during lunch break showed, the produced
>>> output is not decodable any more. I will take a closer look this
>>> evening at home, where I have more and better equipment.
>> Ralph,
>> which device is this on?
>> Thanks,
>> Martin

More information about the USRP-users mailing list