[USRP-users] The FPGA build is not compatible with the host code build
ianb at ionconcepts.com
Tue Apr 14 14:43:16 EDT 2015
In this case it's an N2x0 or USRP2..thus the user will additionally have to manually burn the FPGA update to the USRP flash.
On Apr 14, 2015, at 11:35 AM, Martin Braun via USRP-users <usrp-users at lists.ettus.com> wrote:
> I recommend git-pulling UHD to the latest maint version, and then running the commands again. That should fix the issue (see also my previous email with the 3.8.3 release announcement).
> On 14.04.2015 08:59, Yue Zheng via USRP-users wrote:
>> Hi all,
>> I'm a new user of GNURadio and USRP. I used the script "build-gnuradio"
>> to download the source and have installed them all.But when I tried the
>> "uhd_fft", the terminal showed as belows:
>> Linux; GNU C++ version 4.6.3; Boost_104800; UHD_003.008.002-168-gddae9468
>> -- Opening a USRP2/N-Series device...
>> -- Current recv frame size: 1472 bytes
>> -- Current send frame size: 1472 bytes
>> Please update the firmware and FPGA images for your device.
>> See the application notes for USRP2/N-Series for instructions.
>> Expected FPGA compatibility number 11, but got 10:
>> The FPGA build is not compatible with the host code build.
>> Please run:
>> "/usr/local/lib/uhd/utils/usrp_n2xx_simple_net_burner" \
>> I followed the instruction as above. However, the problem still exists.
>> I noticed that the images it downloaded is
>> "uhd-images_003.008.002-157-gbe03e694.zip",which seemed to be not
>> compatible with UHD_003.008.002-168-gddae9468.
>> Can anyone tell me how to figure it out ? which of the files on
>> http://files.ettus.com/binaries/images/ is number 11?
>> Thanks very much.
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
> USRP-users mailing list
> USRP-users at lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users