[USRP-users] Simple Cal Question N210

Marcus D. Leech mleech at ripnet.com
Fri Apr 10 09:40:12 EDT 2015


On 04/10/2015 08:28 AM, The Tilla via USRP-users wrote:
>
> I know the doc says to run the cal utilities with all RF connections 
> disconnected.
>
> Should they also be terminated?
>
> Any advantage to terminating RF1/RF2/10MHz/PPS inputs during calibration?
>
> Thanks,
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Terminating the RF inputs may be a good move at higher frequencies, 
since leakage inwards from the outside world is more likely at higher 
frequencies.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150410/1597d66b/attachment-0002.html>


More information about the USRP-users mailing list