[USRP-users] E310 jtag and gpio connector

Moritz Fischer moritz.fischer at ettus.com
Thu Apr 9 15:09:39 EDT 2015


Hi Jeffrey,

this is up to your personal preference. I prefer adding chipscope
manually using coregen, some of my colleagues do it using the
chipscope inserter.
Both ways work.

Cheers,
Moritz

On Thu, Apr 9, 2015 at 9:31 AM, Long, Jeffrey P. via USRP-users
<usrp-users at lists.ettus.com> wrote:
> Neel-
>
> Thank you this is perfect.
>
> Taking this to the next logical step how would you recommend introducing
> chipscope into the build flow. I have done it through the GUI and I have
> done it manually through the command line but I was not sure if I should try
> to hack your makefile or generate a GUI project and insert through that. In
> the past I believe your make creates a ISE project, not sure what happens
> with XPS now and the zynq.
>
> Thanks
> Jeff
>
> From: Neel Pandeya <neel.pandeya at ettus.com>
> Date: Wednesday, April 8, 2015 at 5:36 PM
> To: Jeffrey Long <jplong at mitre.org>
> Cc: "USRP-users at lists.ettus.com" <USRP-users at lists.ettus.com>, Ryan Reyes
> <ryan.reyes at ettus.com>
> Subject: Re: [USRP-users] E310 jtag and gpio connector
>
> Hello Jeff:
>
> We would suggest this kit for the JTAG breakout:
>
> http://www.digikey.com/product-detail/en/ATJTAGICE3ACCKIT/ATJTAGICE3ACCKIT-ND/3719593
>
> The board shown in Figure 1 would connect directly onto the J13 header, and
> the cable shown in Figure 2 would provide the "pigtail" solution. (both
> figures are attached to this email)
>
> Regarding GPIO, the mating connector (to J12) is Hirose DF20A-10DS-1C. We
> don't have a full cable assembly off-the-shelf, but one would only need the
> connector and some 28 or 30 gauge wires.
>
> --Neel
>
>
>
> On 7 April 2015 at 07:57, Long, Jeffrey P. via USRP-users
> <usrp-users at lists.ettus.com> wrote:
>>
>> Does anyone know what plugs I would buy to rig up a jtag and gpio
>> connection on the E310? Just want to know what I would search for online or
>> if someone can pass on a link that would be great. Could be a pig tail that
>> I connect to something else.
>>
>> Thanks
>>
>> Jeff Long
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>




More information about the USRP-users mailing list