[USRP-users] Question: new (green) USRP B210 and Takachi enclosure

Piotr Krysik perper at o2.pl
Fri Apr 3 04:14:17 EDT 2015


Many thanks Patrick!

Your answer is exactly what I needed to know.

Best Regards,
Piotr Krysik

W dniu 03.04.2015 o 00:54, Patrick Sathyanathan pisze:
> Correction: "SMA connector/USB/power jack holes"
>  
> --Patrick
>  
> ------------------------------------------------------------------------
> From: wpats at hotmail.com
> To: perper at o2.pl
> Subject: RE: [USRP-users] Question: new (green) USRP B210 and Takachi
> enclosure
> Date: Thu, 2 Apr 2015 15:43:17 -0700
>
> I recently purchased a B210 enclosure from Takachi and the model I
> ordered was MXA3-11-16SSH (though the label on the packing said
> something like FXA3-11-16SSH, can't confirm right now). It fits my
> revision 6 B210 perfectly. It comes with printing of the front and
> back panels, which have all SMA connector/UDB/power jack holes, as
> well as two screw holes in each plate (screws included). You should
> tell them that it's for the rev 6 and they have all the drawings for it.
>  
> Here is a snippet from their invoice:
>  
> *
>
> Customization : Ettus B210 ver.6
>
> */
>
> Enclosure : USD17.93 /unit
>
> /
>
> All Alu. Mobile Enclosure, Torx-screws
>
> Silver Anodized Frames / Silver Anodized End-panels
>
> /
>
> Milling : USD62.89 /unit
>
> /
>
> DRW#B2Xx_PLATE_R2_111814 (Updated Nov.20,2014)
>
> Note: All inner-side corners of rectangular cutouts are R0.5 (Radius
>
> 0.5mm).
>
> Note: Base material (color) is visible after machined.
>
> /
>
> Inkjet-printing : USD26.55 /unit
>
> /
>
> ART#B2Xx_PLATE_R2_111814 (Updated Nov.20,2014)
>
> 2-side, 1-color (Black)
>  
> --Patrick
> > Date: Thu, 2 Apr 2015 15:42:42 +0200
> > To: usrp-users at lists.ettus.com
> > Subject: Re: [USRP-users] Question: new (green) USRP B210 and
> Takachi enclosure
> > From: usrp-users at lists.ettus.com
> >
> > W dniu 02.04.2015 o 15:19, David via USRP-users pisze:
> > > On 2015-04-02 14:14, Piotr Krysik via USRP-users wrote:
> > >> Hi all,
> > >>
> > >> I wonder if Takachi enclosure MXA3-11-16 is suitable for USRP B210
> > >> revision 6?
> > >> If yes - is there design for drilling holes in the front and back
> of the
> > >> enclosure available?
> > >
> > > It doesn't directly answer your question, but an old reply of mine
> > > might help you:
> > >
> http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2015-February/012608.html
> > >
> > > David
> > >
> > I've seen that post but I have following situation:
> > I'm in advanced talks with a company based in Poland regarding purchase
> > of 4 Takachi enclosures (with drilled holes and with printing) for B210
> > devices that we are going to buy. But I just figured out that Takachi
> > enclosures were advised for white USRPs B210 and there is no information
> > if the revision 6 devices will fit in it. I cannot find any drawing with
> > dimensions for drilling holes in the enclosure for revision 6 B210.
> >
> > There is this file:
> >
> http://files.ettus.com/b2x0_enclosure/B210_PLATE_REV1.2_070913_FINAL2.pdf
> > but there are no dimensions.
> >
> > Piotr
> >
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users at lists.ettus.com
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com





More information about the USRP-users mailing list