[USRP-users] uhd_usrp_probe error

Wenbin Toh wenbintoh90 at gmail.com
Mon Sep 22 20:08:30 EDT 2014


Hi Neel,

Thanks for the reply. As currently my system is running ubuntu 13.10, I
would like to know if it is able to use the UHD 3.7.2?

Regards,
Wen Bin
On 23 Sep 2014 04:42, "Neel Pandeya" <neel.pandeya at ettus.com> wrote:

> Hello ​Wenbin Toh:
>
> In order to upgrade your UHD to version 3.7.2, download the file at the
> link below [1]. If you have Fedora 19/20 or Ubuntu 12.04/14.04, you may be
> able to install it using the .rpm or .deb package files, respectively. If
> you install from source, follow the instructions listed at [2].
>
> [1] http://files.ettus.com/binaries/uhd_stable/latest_stable/
>
> [2] http://files.ettus.com/manual/page_build_guide.html
>
> Once you have successfully completed the installation of 3.7.2, then run
> the "usrp_x3xx_fpga_burner" utility.
>
> --Neel
>
>
> On Wed, Sep 17, 2014 at 5:07 PM, Wenbin Toh <wenbintoh90 at gmail.com> wrote:
>
>> Hi Neel,
>>
>> Thanks for the suggestion. But could you explain how do I upgrade my UHD
>> version from 3.7.1 to 3.7.2? Do I have to extract the files of 3.7.2 to UHD
>> folder and run " usrp_x3xx_fpga_burner" ?
>>
>> Regards,
>> Wen Bin
>>  On 17 Sep 2014 00:30, "Neel Pandeya" <neel.pandeya at ettus.com> wrote:
>>
>>> Hello ​Wenbin Toh:
>>>
>>> Since you're using an X-series device, I would recommend that you use
>>> the latest version of UHD, which is 3.7.2. I would also suggest building it
>>> from source. You can get the tar-ball at the link below.
>>>
>>> http://files.ettus.com/binaries/uhd_stable/latest_stable/
>>>
>>> After you upgrade UHD, you will need to run "usrp_x3xx_fpga_burner" to
>>> burn the 3.7.2 FPGA image onto your X310 device.
>>>
>>> --Neel
>>>
>>>
>>>
>>> On Sun, Sep 14, 2014 at 10:59 PM,
>>> ​​
>>> Wenbin Toh via USRP-users <usrp-users at lists.ettus.com> wrote:
>>>
>>>> Hello all,
>>>>
>>>> Recently, I tried to configure my Usrp x310 to work with my gnuradio
>>>> 3.7.2.2. I used the command "uhd_usrp_probe" to test if the computer
>>>> recognise the connection. However, I received this error message as shown
>>>> below:
>>>>
>>>>           linux; GNU C++ version 4.8.1; Boost_105300;
>>>>> UHD_003.007.001-release
>>>>>
>>>>> -- X300 initialization sequence...
>>>>> -- Determining maximum frame size... 1472 bytes.
>>>>> -- Setup basic communication...
>>>>> Error: RuntimeError: Expected FPGA compatibility number 0x4, but got
>>>>> 0x6.0:
>>>>> The FPGA build is not compatible with the host code build.
>>>>> Please run:
>>>>>
>>>>> sudo "/usr/lib/uhd/utils/uhd_images_downloader.py"
>>>>>
>>>>> After running the command as suggested, sudo
>>>> "/usr/lib/uhd/utils/uhd_images_downloader.py". I received another error
>>>> message which is shown below:
>>>>
>>>> Images destination:      /usr/share/uhd/images
>>>>> Downloading images from:
>>>>> http://files.ettus.com/binaries/maint_images/archive/uhd-images_003.007.001-release.zip
>>>>> Downloading images to:
>>>>> /tmp/tmpJ8nEqT/uhd-images_003.007.001-release.zip
>>>>>  23859 kB / 23859 kB (100%)
>>>>> Failed to install image archive: 'NoneType' object has no attribute
>>>>> 'decompressobj'
>>>>> This is usually a permissions problem.
>>>>> Please check your file system access rights and try again.
>>>>> You can run this again with the '--verbose' flag to see more
>>>>> information
>>>>> If the problem persists, please email the output to: support at ettus.com
>>>>>
>>>>
>>>> I have no idea what I should do next. So I would sincerely hope someone
>>>> could enlighten me on what I should do next as I am new to this linux
>>>> system and is on the process of learning. Thanks in advance.
>>>>
>>>> Best Regards,
>>>> Wen Bin
>>>>
>>>>
>>>> _______________________________________________
>>>> USRP-users mailing list
>>>> USRP-users at lists.ettus.com
>>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>>
>>>>
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20140923/9ce63b09/attachment-0002.html>


More information about the USRP-users mailing list