[USRP-users] how to program FPGA (ETTUS B200)
ianb at ionconcepts.com
Tue Oct 28 14:26:31 EDT 2014
B200 uses the LX75 FPGA which is supported by the free ISE Webpack tools
B210 uses the LX150 FPGA and requires the purchased full license ISE tools.
On Oct 28, 2014, at 10:49 AM, Martin Braun via USRP-users <usrp-users at lists.ettus.com> wrote:
> On 10/28/2014 05:51 PM, Ruben Merz via USRP-users wrote:
>> Dear Massimo, If you've never done it, then unless you have a really
>> good reason, don't do it :-)
> There is some truth in this.
> However, the short version is:
> - Download and install ISE Webpack
> - Set up your environment (this depends on your OS etc., check the ISE
> manuals). You want the ISE toolchain in your path.
> - We have a build infrastructure you can use. Head to usrp3/top/b200 and
> run the Makefile there.
>> Ok, if you want to learn, go ahead. But is there an application that
>> you believe you would not be able to implement first on gnuradio or
>> with the UHD API?
>>> -----Original Message----- From: USRP-users
>>> [mailto:usrp-users-bounces at lists.ettus.com] On Behalf Of massimo
>>> zampetti via USRP-users Sent: Tuesday, October 28, 2014 3:05 PM To:
>>> USRP-users at lists.ettus.com Subject: [USRP-users] how to program
>>> FPGA (ETTUS B200)
>>> Hi, I'd like to understand how it is possible to program the FPGA
>>> of my ETTUS B200. I read that the USRP B200 can be programmed with
>>> the free version of Xilinx tools. I've never done anything like
>>> this so I wonder if someone could help me. Is there documentation
>>> about it? Where can I find it? Is there anyone who has worked on
>>> these issues? regards,
>>> _______________________________________________ USRP-users mailing
>>> list USRP-users at lists.ettus.com
>> _______________________________________________ USRP-users mailing
>> list USRP-users at lists.ettus.com
> USRP-users mailing list
> USRP-users at lists.ettus.com
More information about the USRP-users