[USRP-users] Buying antennae and RF Cable for USRP B210

Soumen Banerjee soumen08 at gmail.com
Tue Oct 28 07:24:04 EDT 2014


Hi,
So in essence, for the cable, what I am looking for is something with this :
1) 50 ohm impedance
2) SMA connectors on both ends
3) Low loss near 6GHz

Have I got it covered?

Thanks,
Soumen

On Tue, Oct 28, 2014 at 3:33 PM, Martin Braun via USRP-users <
usrp-users at lists.ettus.com> wrote:

> On 10/28/2014 07:34 AM, Soumen Banerjee via USRP-users wrote:
> > Hi,
> > I have a B210 with one VERT2450 antenna. For my application, I need to
> > have two antennae separated by a baseline. To achieve this, I need to
> > buy some more antennae and some RF cable. What parameters do I need to
> > consider when buying these? I plan to work in the 5.7-5.8GHz ISM band.
>
> RF cables come in different quality, mainly determined by their loss.
> Your antenna should obviously match your frequency range, but also
> depends on which application you are developing.
> Remember that the B-Series (like all our current devices) has SMA
> connectors, so make sure you buy something that matches that.
>
> Do you have a local RF guru you can ask about these things? That might
> yield better results than this list, where we don't really know what you
> need.
>
> Best results!
>
> Martin
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20141028/298c9fe0/attachment-0002.html>


More information about the USRP-users mailing list