[USRP-users] X310 MTU frame size issue

Louis Brown rfengr00 at me.com
Fri Oct 24 14:16:16 EDT 2014


I was using stop button.  I close the GUI window and the X310 link now stops cleanly with the link light extinguishing immediately.  Wow, I have been doing it wrong for quite a long time.

Thanks,
Lou


On Oct 24, 2014, at 12:08 PM, Michael West <michael.west at ettus.com> wrote:

> Hi Louis,
>
> Are you stopping GRC by closing the pop-up window or by the "Kill the flowgraph" button in the toolbar?  I ask because they operate differently.  Closing the pop-up window will exit the application cleanly and you should be able to run over and over again.  Using the "Kill the flowgraph" button in the toolbar is equivalent to using Ctrl-C and can leave the device in an undesirable state.  As you have observed, the device eventually returns to a usable state even if you kill the application but it could take a few seconds.
>
> Regards,
> Michael
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20141024/339a295c/attachment-0002.html>


More information about the USRP-users mailing list