[USRP-users] Connect USRP to OSMO board

Carlos Alberto Ruiz Naranjo carlosruiznaranjo at gmail.com
Thu Oct 23 03:57:41 EDT 2014


OK! Thank you ;)

2014-10-20 20:06 GMT+02:00 Ian Buckley <ianb at ionconcepts.com>:

> Why not just throw in an off the shelf bias-T to act as a DC block in the
> RF path? For example http://www.minicircuits.com/pdfs/ZFBT-4R2G+.pdf
> That way you don't have to worry about what WBX or any other signal source
> might tolerate.
> -Ian
>
> On Oct 20, 2014, at 5:17 AM, Carlos Alberto Ruiz Naranjo via USRP-users <
> usrp-users at lists.ettus.com> wrote:
>
> I have a GPS receiver (
> http://u-blox.com/images/downloads/Product_Docs/LEA-NEO-6T_ProductSummary_%28GPS.G6-HW-09020%29.pdf
> ) with a Osmo board ( http://openbsc.osmocom.org/trac/wiki/osmo-lea6t-gps
> )
>
>
> Can I directly connect the USRP (WBX) to the GPS receiver?  (RF USRP --->
> RF receiver)
> Can I damage the WBX board with the antenna power supply (of RF port)?
>
> Thank you.
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20141023/164c168a/attachment-0002.html>


More information about the USRP-users mailing list