[USRP-users] Connect USRP to OSMO board

Ian Buckley ianb at ionconcepts.com
Mon Oct 20 14:06:44 EDT 2014


Why not just throw in an off the shelf bias-T to act as a DC block in the RF path? For example http://www.minicircuits.com/pdfs/ZFBT-4R2G+.pdf
That way you don't have to worry about what WBX or any other signal source might tolerate.
-Ian

On Oct 20, 2014, at 5:17 AM, Carlos Alberto Ruiz Naranjo via USRP-users <usrp-users at lists.ettus.com> wrote:

> I have a GPS receiver ( http://u-blox.com/images/downloads/Product_Docs/LEA-NEO-6T_ProductSummary_%28GPS.G6-HW-09020%29.pdf ) with a Osmo board ( http://openbsc.osmocom.org/trac/wiki/osmo-lea6t-gps )
> 
> 
> Can I directly connect the USRP (WBX) to the GPS receiver?  (RF USRP ---> RF receiver)
> Can I damage the WBX board with the antenna power supply (of RF port)?
> 
> Thank you.
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20141020/ae3a554a/attachment-0002.html>


More information about the USRP-users mailing list