[USRP-users] OctoClock Firmware Install

Ben Hilburn ben.hilburn at ettus.com
Tue Oct 14 19:41:49 EDT 2014


Also, would you mind clarifying what you mean by "the schematic shows the
connector reversed"? The schematic doesn't indicate orientation. Are there
docs somewhere that are incorrect?

If our docs are wrong somewhere, we want to fix that as soon as possible.

Cheers,
Ben

On Tue, Oct 14, 2014 at 4:37 PM, Ben Hilburn <ben.hilburn at ettus.com> wrote:

> Hi Claude -
>
> So, first thing is that you don't need to do any of this. The new firmware
> is only necessary if you want to use some of the newly developed features,
> like reading the NMEA strings out to UHD. The octoclock is fully functional
> as it arrives.
>
> The firmware burner utility will run if the Octoclock device is enabled
> during your CMake configuration. When you run CMake, do you see it as an
> enabled module?
>
> Cheers,
> Ben
>
> On Tue, Oct 14, 2014 at 8:28 AM, LEMENAGER Claude via USRP-users <
> usrp-users at lists.ettus.com> wrote:
>
>> Hello,
>>
>>
>>
>> I am trying to setup an Octoclock, following the documentation.
>>
>> First step, avrdude for the bootloader through an usbasp programmer is
>> completed (with an error for the readback at an high address so I think it
>> was not critical).
>>
>> At this level I mention that for me the schematics of the octoclock shows
>> the J108 ISP connector reversed (I used a tester to find gnd and Vcc)
>>
>> The second step should make use of an “octoclock_firmware_burner and I
>> did not find any trace of it (except source code)
>>
>> So my question is how to perform the load of the primary Octoclock
>> firmware?
>>
>>
>>
>> Thank you for help,
>>
>>
>>
>> Claude Leménager
>>
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20141014/6f2da82a/attachment-0002.html>


More information about the USRP-users mailing list