[USRP-users] X3X0 SBX corrupted samples?
marcus.mueller at ettus.com
Thu Oct 9 09:38:35 EDT 2014
Hello Mr. Leménager,
the warning that the LO is not locked is severe in principle; are you
using an external reference clock?
Could you paste the complete warning?
At which frequencies are you working?
On 09.10.2014 15:30, LEMENAGER Claude via USRP-users wrote:
> I sample at least two channels (SBX 120) from one or multiple X310 boards each equipped with two SBX radio boards.
> I uses NIUSRPRIO_PCIE==>UHD003.007.002 ==>Gnuradio 3.7.5 (built for this UHD under UBUNTU 14.04LTS).
> The input is connected to a CW generator. The channels definition is A:0 B:0, antenna is RX2 in all cases.
> The problems :
> 1) I receive a warning concerning lo_locked no locked after timeout for each channel (I read a discuss where this fact was given)
> 2) When I connect the A:0 channel on a gnuradio scope, this seems OK (I and Q parts). When I connect a B:0 channel (from any X310 board) I receive the CW wave plus spurious (sort of dirac through a filter) generally starting on Q channel but not only. This look like an erroneous sample (digitally speaking for example just an incorrect bit in the LSBs) before DDC. The spurious looks like periodic but the period seems to change with radio frequency (to confirm)
> Did somebody encounters this problem?
> If yes, is there a solution.
> I plan to try to reproduce this (or to see if it's the same) with UHD directly accessed BY a C++ application.
> Claude Leménager
> P.S. Conclusion about preceding discussion (june) about PCIe interface: The HP PC on which I made my firsts experiences was equipped with one of the first generation PCIe chip. So it failed to interface with X310. I now uses a last generation pc and then there is no problem except for what I mention above. Thanks for support.
> USRP-users mailing list
> USRP-users at lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users