[USRP-users] check send successfully
marcus.mueller at ettus.com
Mon Dec 1 09:26:50 EST 2014
Hi w xd/xdw/xd/Xianda,
If you were able to transmit the samples to your USRP, then they will be
I don't understand your second question; are you asking us how to
terminate a C++ while loop?
On 12/01/2014 03:17 PM, w xd wrote:
> Hi Müller:
> Thank you.
> Because the signal is send in the future.It has been
> described by metadata.It haven't send now.For example,I set a counter in
> the loop.The counter have already reach some number.But the signal now
> haven't send.
> 1.send a frame
> For example,when counter=15.But it haven't send 15 times.Because it send in
> the future.
> Another question:how to stop the loop?When i set
> while(counter<=15),it stop fastly.And it haven't send.I have read the
> example:tx_burst.cpp.And it set: while (not stop_signal_called and
> repeat);Now i just want the program send 15 times.
> Best regards,
> 2014-12-01 22:04 GMT+08:00 Marcus Müller <usrp-users at lists.ettus.com>:
>> Hi xdw,
>> what do you mean with "check send successfully"?
>> usually, unless your send() call says something went wrong (ie. the number
>> it returns isn't the number of samples you wanted to send), it should have
>> been successfull.
>> Could you explain in a little more depth what you are trying to do and
>> which problems you encounter?
>> Best regards,
>> Marcus Müller
>> On 12/01/2014 04:01 AM, w xd via USRP-users wrote:
>> Hi all:
>> I just want to realize the following function,but i don't know how
>> to check the usrp send successfully.
>> 1.send a frame--->sending a timed burst
>> 2.after send successfully--->tcpip accept and receive
>> The above repeated.Can someone have some ideas?
>> Thank you.
>> Best regards,
>> USRP-users mailing listUSRP-users at lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
More information about the USRP-users