[USRP-users] USRP N210 revision number

Josh Blum josh at ettus.com
Wed Feb 13 19:28:43 EST 2013



On 02/13/2013 06:26 PM, Nick Foster wrote:
> On 02/13/2013 04:17 PM, djch-usrp at hutchhome.co.uk wrote:
>> I have to use an N210 for the first time, and I need to determine the
>> revision number to load the correct FPGA images
>>
>> Unfortunately we had to buy the device via National Instruments in the
>> UK - long story.... And so the box only has a National Instrument
>> sticker on the back , which calls an N210 + WBX an 'NI USRP-2920' NO
>> revision number
>>
>> I've looked in the box, the WBX says rev 3.0, but I can't see anything
>> on the PCB (unless it's on the underside - don't want to totally strip
>> it (yet))
>>
>> I have photographed the main chip numbers - does anyone know what
>> changed rev 2 to 3 to 4 - or how to determine this by software. (I'm
>> trying *not* to brick the device in my first 24h - I don't have any
>> access to jtag kit to recover it:-)
>>
>> I need to load the normal ettus fpga code for gnuradio - I believe it
>> currently holds the NI labview code
> It's a rev 4. Thanks for asking. =)
> 

Also, if you run uhd_usrp_probe from a recent version of UHD (3.5 and
up). The error message printed should give the command to download and
burn the correct images.

-josh

> --n
> 
>>
>> Many thanks
>>
>> --David
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
> 
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com




More information about the USRP-users mailing list