[USRP-users] unrecognized WBX daughterboard in B100 under Windows 7

mleech at ripnet.com mleech at ripnet.com
Wed Feb 13 14:10:18 EST 2013


 

On 13 Feb 2013 13:43, Iliya Voronov wrote: 

> Hi, all,
> 
> I am
trying to use USRP B100 and WBX under Windows 7. Received signal is
>
always zero with any carrier freq, sample rate, gain etc.
uhd_usrp_probe
> can not correctly recognize the daughterboard, full
output is listed below.
> It always happens at fast machine under 64-bit
Windows 7 and it happens
> in most cases at slow machine under 32-bit
Windows 7. Very rarely at
> slow 32-bit machine, uhd_usrp_probe
correctly detect WBX frontend, but
> received signal is still zero.
>
UHD and GNU Radio are installed according to wiki guide, latest stable
>
release. USRP B100 and WBX are just from the box.
> 
>
C:Usersiliya>uhd_usrp_probe
> Win32; Microsoft Visual C++ version 10.0;
Boost_104700;
> UHD_003.005.001-release

I would check to make sure that
your WBX is correctly seated in the connectors, and that there are no
bent/broken pins. 

If that doesn't resolve it, send a note to
support at ettus.com 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20130213/a04c95d0/attachment-0002.html>


More information about the USRP-users mailing list