[USRP-users] E1XX update additional step

Philip Balister philip at opensdr.com
Mon Apr 1 14:51:21 EDT 2013

On 04/01/2013 01:27 PM, Macre, William R wrote:
> Philp:
> I also am having the same problem as Alex Gladd.  After the upgrade I reboot the unit and it hangs up immediately after loading the E110 FPGA.  It gets to the “DONE=1” message and “Configuration complete” then hangs.  Very repeatable.  If I can replace the new FPGA build with the previous one, will it work with the new UHD code???

Can you try with a new sd card built from:


It worked for me and at least one other person.


> Wrm
> From: USRP-users [mailto:usrp-users-bounces at lists.ettus.com] On Behalf Of philip at opensdr.com
> Sent: Friday, March 29, 2013 7:40 PM
> To: usrp-users at lists.ettus.com
> Subject: [USRP-users] E1XX update additional step
> After running upgrade, reboot the unit so you are running on the new kernel.
> Philip
> --
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.

More information about the USRP-users mailing list