[USRP-users] Reg : USRP1 terminator

sumit kumar cogwsn at gmail.com
Sun Sep 30 00:31:22 EDT 2012

Thanks Nick .. got it :)

On Sat, Sep 29, 2012 at 11:30 PM, Nick Foster <nick at ettus.com> wrote:

> So, you probably won't need it at all. The USRP1 Terminator is designed to
> absorb reflections on the clock line, which on that device is daisy-chained
> between RX and TX on each side. An unterminated stub (which occurs on side
> B when using an RX-only dboard like DBSRX2 or TVRX2) can be terminated
> using the USRP1 Terminator, preventing reflections which can cause false
> clock transitions. Since BasicTX doesn't use a clock at all, it won't make
> any difference for your application.
> --n
> On Sat, Sep 29, 2012 at 7:10 AM, sumit kumar <cogwsn at gmail.com> wrote:
>> Recently I got USRP1 terminator with my USRP. Its was mentioned that I
>> have to terminate the TXB port while I am receiving using DBSRX2 or TVRX2
>> at RXB. I was curious to know why so ?
>> Will I be needing it if I have put a Basix TX db at TXB ?
>> Sumit
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20120930/e12eec0c/attachment-0002.html>

More information about the USRP-users mailing list