[USRP-users] E100 uhd.git build

Philip Balister philip at opensdr.com
Mon Sep 24 10:27:44 EDT 2012


On 09/24/2012 09:07 AM, Antonio Mancina wrote:
> Hi Marcus,
>
>> On 09/22/2012 10:41 AM, Antonio Mancina wrote:
>>> Hi again Marcus,
>>>
>>>> I dropped distcc-based compilation and just restarted the whole
>>>> compilation (E100 support was on, now). I'll let you know how it'll end.
>>>
>>> that did it. Sorry for the useless noise on the list.

What rootfs are you using? If you have the 003 based image, you should 
run opkg update; opkg upgrade.

Philip

>
> I spoke too early.
>
> At the end, after a reboot, this is the output of a
>
> uhd_usrp_probe
>
> -----------------------------------------------------------------
> $ uhd_usrp_probe
> linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500;
> UHD_003.004.003-227-g0ccf3453
>
> -- Loading FPGA image:
> /usr/local/share/uhd/images/usrp_e100_fpga_v2.bin... done = 1
> -- Configuration complete.
> -- Initializing FPGA clock to 64.000000MHz...
> -- USRP-E100 clock control: 10
> --   r_counter: 2
> --   a_counter: 0
> --   b_counter: 20
> --   prescaler: 8
> --   vco_divider: 5
> --   chan_divider: 5
> --   vco_rate: 1600.000000MHz
> --   chan_rate: 320.000000MHz
> --   out_rate: 64.000000MHz
>





More information about the USRP-users mailing list