[USRP-users] MIMO Cable

Damien Serant damien.serant at gmail.com
Thu Jun 28 19:06:32 EDT 2012


Thanks a lot Josh. The problem was effectively  the "stream_now=true"
parameters.

Regards,

Damien

2012/6/26 Josh Blum <josh at ettus.com>

>
>
> On 06/26/2012 06:17 AM, Damien Serant wrote:
> > Hi list,
> >
> > Is the MIMO cable sold with the original USRP2 compatible with the USRP
> > N200, because i don't manage to perform MIMO operation ("failed to
> > time-align" error) ?
> >
>
> Yes, the same cable will work.
>
> Failed to time align might mean that you have not told of of the board
> to set_clock/time_source("mimo") or that the RX samples were not told to
> stream at a specific time. ie you cannot use stream_now=true with
> multi-channel.
>
> -josh
>
> > Thanks,
> >
> > Damien
> >
> >
> >
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users at lists.ettus.com
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20120629/a663b766/attachment-0002.html>


More information about the USRP-users mailing list