[USRP-users] Reusing a block for multiple iterations

Tinajayce Mathews tmathews at mail.uh.edu
Thu Jun 21 09:41:47 EDT 2012

Hi Nick,

Thanks for your reply.
I am using a Block A = connect(x,y,z) and this is a hierarchical block. I wanted to reuse this block in another C++ like this 
             use Block A 
       end of loop..

Is this possible ?
Even I use it this way, will it hinder performance?

Tina Mathews

----- Original Message -----
From: Nick Foster <nick at ettus.com>
Date: Wednesday, June 20, 2012 3:11 pm
Subject: Re: [USRP-users] Reusing a block for multiple iterations
To: Tinajayce Mathews <tmathews at mail.uh.edu>
Cc: usrp-users at lists.ettus.com

> On Wed, Jun 20, 2012 at 1:06 PM, Tinajayce Mathews <tmathews at mail.uh.edu> wrote:
 > Hi All,
> I wanted  to use  a C++ block and run it multiple number of times. For eg: I am  using a block to run one iteration. If I needed the results from this  block again in the continuing iterations, is there a work around for it.  I am using a hierarchical block and calling it like a function. I  wonder if this is possible. Any help is appreciated. 
> Thanks a lot for your help.
> Unless I'm misunderstanding your question, just store the results from last time in a private buffer which is a member of the block class. > 
> --n>  > 
> Regards,
>  Tina Mathews,
> Instructional Assistant
> Email: tmathews at mail.uh.edu
> _______________________________________________
>  USRP-users mailing list
 > USRP-users at lists.ettus.com
 > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20120621/970e2a6c/attachment-0002.html>

More information about the USRP-users mailing list