[USRP-users] USRP1 o USRP B100

Nick Foster nick at ettus.com
Mon Jun 11 09:41:45 EDT 2012


The USRP N2x0, B100, E1x0 will all take separate TX and RX daughterboards
which can be used simultaneously, or a single combined TX/RX daughterboard
like WBX, SBX, etc.

HTH,
--n

On Mon, Jun 11, 2012 at 3:18 AM, paco paquito <cuatrodos34 at yahoo.es> wrote:

> Hi,
>
> I'm thinking in buy a USRP, USRP1 or USRP B100, for educational purposes.
> I would like to put in practice what I have learnt theoretically.
>
> A think I would like to do is work with RFID (13.56 MHz). In this case I
> need to emit and receive the signal, so I need BasicTX and BasicRX, or LFTX
> and LFRX.
>
> I would like to know if in B100 I can use BasicTX and BasicRX (or the
> other ones) at the same time or I need USRP1 that permit two daughterboards.
>
>
> Thanks.
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20120611/c2afcfe4/attachment-0002.html>


More information about the USRP-users mailing list