[USRP-users] GPSDO Support
john.malsbury at ettus.com
Mon Jun 4 12:05:38 EDT 2012
I'm sorry, I forgot to include a link.
On 6/4/2012 9:02 AM, Simon HB9DRV wrote:
> Hi John,
> Yes, you've explained it. I assume the EEPROM burning instructions
> will be shipped with the GPSDO?
> Simon Brown, HB9DRV
> http://dit-dit-dit.com <http://dit-dit-dit.com/>
> You are standing at the end of a road before a small brick building.
> Around you is a forest.
> A small stream flows out of the building and down a gully. The sunspot
> count is 285.
> *From:*usrp-users-bounces at lists.ettus.com
> [mailto:usrp-users-bounces at lists.ettus.com] *On Behalf Of *John Malsbury
> If you follow the instructions here, and burn the EEPROM, the USRP
> will be configured to select the GPSDO 10 MHz and 1 PPS by default.
> As indicated in the installation instructions provided with the GPSDO,
> you will have to move a jumper that will connect the GPSDO 10 MHz, and
> disconnect the external 10 MHz reference. You should not need to do
> anything with the .hdl code.
> Have I properly understood your questions?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users