[USRP-users] E100 official image problem

Ben Hilburn ben.hilburn at ettus.com
Mon Feb 6 20:21:38 EST 2012


Ahmed -

Actually, no, you don't need to worry about that boot.scr error =)

That said, there is obviously something wrong if the device doesn't boot!
 You said you are using e1xx-002, which you made using the MakeSDCard.sh
script, correct?

A few things:

1) Is your E1xx connected to a monitor when you try to boot it?  If so,
will you unplug the screen, and try again?
2) If the above doesn't work, will you put the SD card back into your PC,
and give me the output of the following command?

$ sudo fdisk -l

Cheers,
Ben
----------------------------
Ben Hilburn <http://goo.gl/5DdZ3> @ Ettus Research, LLC<http://www.ettus.com/>



On Mon, Feb 6, 2012 at 5:13 PM, Ahmed Alsawi <ahmedalsawi2012 at gmail.com>wrote:

> sorry,I should have said problem with booting , I guess i need boot.scr.
> Right?
> Does anyone exactly to write in  hte boot.scr ??
>
> On Tue, Feb 7, 2012 at 2:22 AM, Ahmed Alsawi <ahmedalsawi2012 at gmail.com>wrote:
>
>> HI,
>> i got the official image usrpe1xx_02 from wiki and used the script to
>> make SD-card ,,,but when i powered the board
>> it got stuck after Uncompressing Linux... done, booting the kernel.
>> --------------- here the console output
>> -----------------------------------------------
>> No NAND detected
>> OMAP3530-GP ES3.1
>> Board revision: 1
>> Reading boot sector
>> Loading u-boot.bin from mmc
>>
>>
>> U-Boot 2011.09-00000-gc714eec-dirty (Dec 03 2011 - 09:44:39)
>>
>> OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
>> Gumstix Overo board + LPDDR/NAND
>> I2C:   ready
>> DRAM:  512 MiB
>> NAND:  0 MiB
>> MMC:   OMAP SD/MMC: 0
>> *** Warning - readenv() failed, using default environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Board revision: 1
>> Direct connection on mmc2
>> No EEPROM on expansion board
>> Die ID #18340004000000000403730510011005
>> Net:   smc911x-0
>> Hit any key to stop autoboot:  0
>> reading boot.scr
>>
>> ** Unable to read "boot.scr" from mmc 0:1 **
>> reading uImage
>>
>> 2874540 bytes read
>> Booting from mmc ...
>> ## Booting kernel from Legacy Image at 82000000 ...
>>    Image Name:   Angstrom/3.0-pm/usrp-e1xx
>>    Image Type:   ARM Linux Kernel Image (uncompressed)
>>    Data Size:    2874476 Bytes = 2.7 MiB
>>    Load Address: 80008000
>>    Entry Point:  80008000
>>    Verifying Checksum ... OK
>>    Loading Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> Uncompressing Linux... done, booting the kernel.
>>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20120206/174d1244/attachment-0002.html>


More information about the USRP-users mailing list