[USRP-users] E100 official image problem

Ahmed Alsawi ahmedalsawi2012 at gmail.com
Mon Feb 6 20:13:18 EST 2012


sorry,I should have said problem with booting , I guess i need boot.scr.
Right?
Does anyone exactly to write in  hte boot.scr ??

On Tue, Feb 7, 2012 at 2:22 AM, Ahmed Alsawi <ahmedalsawi2012 at gmail.com>wrote:

> HI,
> i got the official image usrpe1xx_02 from wiki and used the script to make
> SD-card ,,,but when i powered the board
> it got stuck after Uncompressing Linux... done, booting the kernel.
> --------------- here the console output
> -----------------------------------------------
> No NAND detected
> OMAP3530-GP ES3.1
> Board revision: 1
> Reading boot sector
> Loading u-boot.bin from mmc
>
>
> U-Boot 2011.09-00000-gc714eec-dirty (Dec 03 2011 - 09:44:39)
>
> OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
> Gumstix Overo board + LPDDR/NAND
> I2C:   ready
> DRAM:  512 MiB
> NAND:  0 MiB
> MMC:   OMAP SD/MMC: 0
> *** Warning - readenv() failed, using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> Board revision: 1
> Direct connection on mmc2
> No EEPROM on expansion board
> Die ID #18340004000000000403730510011005
> Net:   smc911x-0
> Hit any key to stop autoboot:  0
> reading boot.scr
>
> ** Unable to read "boot.scr" from mmc 0:1 **
> reading uImage
>
> 2874540 bytes read
> Booting from mmc ...
> ## Booting kernel from Legacy Image at 82000000 ...
>    Image Name:   Angstrom/3.0-pm/usrp-e1xx
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    2874476 Bytes = 2.7 MiB
>    Load Address: 80008000
>    Entry Point:  80008000
>    Verifying Checksum ... OK
>    Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20120207/933b1e48/attachment-0002.html>


More information about the USRP-users mailing list